2010 Toyota Corolla L4-1.8L (2ZR-FE) Diagnostic Trouble Codes ( DTC ): Manufacturer Code ChartsPage 183

NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR

OK -- Continue to next step.

11. INSPECT SKID CONTROL ECU (SENSOR INPUT)

(a) Reconnect the skid control ECU connector.

(b) Turn the ignition switch to ON.

(c) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

for RH

for LH

NG -- REPLACE BRAKE ACTUATOR ASSEMBLY See: Brakes and Traction Control/Antilock Brakes / Traction Control

Systems/Hydraulic Control Assembly - Antilock Brakes/Service and Repair/Brake Actuator (w/o VSC)/Removal

OK -- Continue to next step.

12. RECONFIRM DTC

(a) Turn the ignition switch off.

(b) Reconnect the front speed sensor connector.

(c) Clear the DTCs See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Reading and

Clearing Diagnostic Trouble Codes/ABS (Antilock Brake System).

(d) Start the engine.

(e) Drive the vehicle at a speed of 40 km/h (25 mph) or more for at least 60 seconds.