Facilities, or devices that use similar radio frequencies are not located in the vicinity of the vehicle.
HINT
Radio transmissions may be interrupted due to the surroundings, or devices installed by the user.
NG -- CHECK IF ANY DEVICE IS INSTALLED BY USER
OK -- Continue to next step.
2. CONFIRM TIRE INFLATION PRESSURE (DATA LIST)
(a) Turn the ignition switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch to ON.
(d) Turn the Techstream on.
(e) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
(f) Check the values by referring to the table below.
Tire Pressure Monitor
Tire Pressure Monitor
HINT
* *: It may take about 2 or 3 minutes until the values are displayed.
* When no "ID Tire Inflation Pressure" data has changed, reset the tire pressure to the appropriate specified value and rotate
the tire 90 to 270 degrees. Then rapidly release the tire pressure and recheck it.
Result:
B -- GO TO DTC C2121/21 TO C2124/24 See: DTC 84
A -- Continue to next step.
No comments:
Post a Comment