Toyota Avalon V6-3.5L (2GR-FE) P Code Page 2038

Toyota Avalon V6-3.5L (2GR-FE) P Code Page 2038

(d) Turn on the tester.

(e) Enter the following items: "Powertrain / ECT / Data List".

(f) According to the display on the tester, read "Data List".

Standard:

NOTICE:

In the table above, the conditions listed under "Normal Condition" are reference conditions. Do not depend solely on these

reference conditions when deciding whether a part is faulty.

OK -- CHECK HARNESS AND CONNECTOR (STOP LIGHT SWITCH ASSEMBLY - TCM)

NG -- Continue to next step.

2. INSPECT STOP LIGHT SWITCH ASSEMBLY

(a) Remove the stop light switch assembly.

(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:

NG -- REPLACE STOP LIGHT SWITCH ASSEMBLY

OK -- Continue to next step.

3. CHECK HARNESS AND CONNECTOR (STOP LIGHT SWITCH ASSEMBLY - TCM)

(a) Install the stop light switch assembly.

(b) Disconnect the TCM connector.

(c) Measure the voltage according to the value(s) in the table below when the brake pedal is depressed and released.