Toyota Avalon V6-3.5L (2GR-FE) P Code Page 2082

Toyota Avalon V6-3.5L (2GR-FE) P Code Page 2082

Check for short

OK -- REPLACE TCM See: Powertrain Management/Transmission Control Systems/Relays and Modules - Transmission and

Drivetrain/Relays and Modules - A/T/Control Module/Service and Repair/Removal (from 12/2010)

NG -- Continue to next step.

2. INSPECT SHIFT SOLENOID VALVE SL2

(a) Remove the shift solenoid valve SL2.

(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:

(c) Connect a positive (+) lead through a 21 W bulb to terminal 2 and a negative (-) lead to terminal 1 of the solenoid valve connector,

then check the movement of the valve.

OK:

The solenoid makes an operating sound.

NG -- REPLACE SHIFT SOLENOID VALVE SL2 See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service

and Repair/Overhaul/Shift Solenoid Valve/Disassembly

OK -- REPAIR OR REPLACE TRANSMISSION WIRE See: Transmission and Drivetrain/Automatic

Transmission/Transaxle/Wiring Harness/Service and Repair/Removal (from 12/2010)

U660E Automatic Transaxle (to 12/2010)

U660E AUTOMATIC TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: P0791, P0793: Intermediate Shaft Speed Sensor "A"

Circuit

P0793 - Intermediate Shaft Speed Sensor "A"

DESCRIPTION

This sensor detects the rotation speed of the turbine which shows the input speed of transaxle. By comparing the input turbine speed signal (NC)

with the counter gear speed sensor signal (NC), the TCM detects the shift timing of the gears and appropriately controls the engine torque and

hydraulic pressure according to various conditions, thus, providing smooth gear shift.