Toyota Avalon V6-3.5L (2GR-FE) P Code Page 2091

Toyota Avalon V6-3.5L (2GR-FE) P Code Page 2091

P0793:

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:

Perform the universal trip to clear permanent DTCs See: Powertrain Management/Transmission Control Systems/Testing and

Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear (to 12/2010).

1. DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference

values when deciding whether a part is faulty.

HINT

Using Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read

without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be

discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save

diagnostic time.

(a) Warm up the engine.

(b) Turn the ignition switch off.

(c) Connect Techstream to the DLC3.

(d) Turn the ignition switch on (IG).

(e) Turn on the tester.

(f) Enter the following items: "Powertrain / ECT / Data List".

(g) According to the display on the tester, read "Data List".

HINT

* SPD (NC) is always 0 while driving: Open or short in the sensor or circuit.