Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 1028

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 1028

HINT

*1: It may take about 2 or 3 minutes until the values are displayed.

(g) Rapidly reduce the tire pressure for each wheel at least 40 kPa (0.4 kg/cm2, 5.8 psi) within 30 seconds.

(h) Check the Data List.

NOTICE:

* It takes about 2 or 3 minutes to display the updated tire pressure data.

* If "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and rotate the

tire 90 to 270 degrees. Then rapidly reduce the tire pressure and recheck it.

* Record the transmitter ID of which "ID Tire Inflation Pressure" data corresponds to each tire.

(i) After confirming that one of "ID Tire Inflation Pressure" data for one tire (ID1 to ID5) has changed, repeat this procedure one by one.

Identify the transmitter that corresponds to the DTC.

Result:

C -- INSPECT TIRE PRESSURE WARNING VALVE AND TRANSMITTER

B -- END

A -- Continue to next step.

4. CHECK HARNESS AND CONNECTOR (ECU - RECEIVER)

(a) Disconnect the D54 ECU connector.