Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 1021
(b) Disconnect the K36 receiver connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE HARNESS OR CONNECTOR
OK -- Continue to next step.
5. INSPECT TIRE PRESSURE WARNING VALVE AND TRANSMITTER
(a) Make sure that the ignition switch is off.
(b) Connect the Techstream to the DLC3.
(c) Turn the ignition switch on (IG).
(d) Turn the Techstream on.
(e) Check the values by referring to the table below. Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
Tire Pressure Monitor:
No comments:
Post a Comment