Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 1004
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
LH
RH
NOTICE:
Check the speed sensor signal after replacement See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Scan Tool Testing and Procedures/Test Mode Procedure (from 12/2010).
NG -- REPLACE REAR SPEED SENSOR
OK -- Continue to next step.
8. CHECK HARNESS AND CONNECTOR (REAR SPEED SENSOR TO SKID CONTROL ECU)
(a) SKID CONTROL ECU TO SKID CONTROL SENSOR WIRE
(1) Disconnect the skid control ECU connector and the rear speed sensor connector.
(2) Disconnect the skid control sensor wire.
(3) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment