Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 103

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 103

HINT

*1: It may take about 2 or 3 minutes until the values are displayed. If the values are not displayed after a few minutes, perform

troubleshooting according to the inspection procedure for DTCs C2121/21 to C2125/25 See: C Code Charts/C2121/Tire Pressure

Monitoring (to 12/2010).

(g) Rapidly reduce the tire pressure for each wheel at least 40 kPa (0.4 kgf/cm2, 5.8 psi) within 30 seconds.

(1) Check that each tire pressure data displayed on the Techstream display has changed.

OK:

Each tire pressure data displayed on the Techstream display will change to the value of the tire pressure.

NOTICE:

* It takes about 2 or 3 minutes to display the updated tire pressure data.

* If "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and rotate the

tire 90 to 270 degrees (including the spare tire). Then rapidly reduce the tire pressure and recheck it.

(2) After confirming that all of the tire pressure data displayed on the Techstream display has changed, set the tire pressure to the

appropriate specified values.

HINT

If the tire pressure data displayed on the Techstream display has not changed after rechecking, inspect for another problem See:

C Code Charts/C2121/Tire Pressure Monitoring (to 12/2010).

NG -- GO TO TRANSMITTER AND RECEIVER INSPECTION PROCEDURE See: C Code Charts/C2121/Tire Pressure

Monitoring (to 12/2010)

OK -- END

Transmitter ID5 Operation Stop - Tire Pressure Monitoring (from 12/2010)

TIRE AND WHEEL: TIRE PRESSURE WARNING SYSTEM: C2111/11-C2115/15: Transmitter ID1 Operation Stop