Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 1024

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 1024

NEXT -- Continue to next step.

11. READ VALUE USING TECHSTREAM (TIRE INFLATION PRESSURE)

(a) Set the air pressure of all the wheels to the specified value See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring

System/Service Precautions/Precaution (to 12/2010).

(b) Make sure that the ignition switch is off.

(c) Connect the Techstream to the DLC3.

(d) Turn the ignition switch on (IG).

(e) Turn the Techstream on.

(f) Check the values by referring to the table below. Enter the following menus: Chassis / Tire Pressure Monitor / Data List.

Tire Pressure Monitor:

HINT

* *1: It may take about 2 or 3 minutes until the values are displayed

* If "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and rotate the

tire 90 to 270 degrees. Then rapidly reduce the tire pressure and recheck it.

Result:

B -- REPLACE TIRE PRESSURE WARNING ECU See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring

System/Tire Pressure Module/Service and Repair/Removal (to 12/2010)