Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 731

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 731

(e) Check for a short in the circuit.

(1) Release the activation prevention mechanism built into connector "B" See: Restraints and Safety Systems/Air Bag

Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System (to 12/2010).

(2) Measure the resistance according to the value(s) in the table below.

Standard resistance:

NG -- REPAIR OR REPLACE FLOOR WIRE NO. 2

OK -- Continue to next step.

4. CHECK CENTER AIRBAG SENSOR ASSEMBLY

(a) Connect the connectors to the curtain shield airbag assembly RH and the center airbag sensor assembly.

(b) Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.

(c) Turn the ignition switch on (IG), and wait for at least 60 seconds.

(d) Clear the DTCs stored in memory See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing

Diagnostic Trouble Codes/DTC Check / Clear (to 12/2010).

(e) Turn the ignition switch off.

(f) Turn the ignition switch on (IG), and wait for at least 60 seconds.

(g) Check the DTCs See: Restraints and Safety Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic

Trouble Codes/DTC Check / Clear (to 12/2010).

OK:

DTC B1835, B1836, B1837, B1838 or 58 is not output.

HINT

Codes other than DTC B1835, B1836, B1837, B1838 and 58 may be output at this time, but they are not related to this check.

NG -- REPLACE CENTER AIRBAG SENSOR ASSEMBLY

OK -- USE SIMULATION METHOD TO CHECK

Short in Front Passenger Side Curtain Shield Squib Circuit - Airbag System (from 12/2010)

SUPPLEMENTAL RESTRAINT SYSTEM: AIRBAG SYSTEM: B1835/58-B1838/58: Short in Front Passenger Side Curtain Shield Squib