Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 864

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 864

HINT

*1: It may take about 2 or 3 minutes until the values are displayed. If the values are not displayed after a few minutes, perform

troubleshooting according to the inspection procedure for DTCs C2121/21 to C2125/25 See: C Code Charts/C2121/Tire Pressure

Monitoring (from 12/2010).

Result:

B -- REPLACE TIRE PRESSURE WARNING ECU See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring

System/Tire Pressure Module/Service and Repair/Removal (from 12/2010)

A -- END

Stuck in Acceleration Sensor - Vehicle Stability Control System (to 12/2010)

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM:

C1232/32,C0371/71,C1234/34,C1243/43-C1245/45,C1279/79,C1381/97: Stuck in Acceleration Sensor

C1381/97 - Acceleration Sensor Power Supply Voltage Malfunction

DESCRIPTION

The skid control ECU receives signals from the yaw rate and acceleration sensor via the CAN communication system.

The yaw rate sensor has a built-in acceleration sensor.

If there is trouble in the bus lines between the yaw rate and acceleration sensor and the CAN communication system, the DTC U0123/62 (lost

communication with yaw rate sensor module) and U0124/95 (lost communication with lateral acceleration sensor module) are output.

These DTCs are also output when the calibration has not been completed.