Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 968

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 968

No scratches or foreign matter on the sensor tip.

NOTICE:

Check the speed sensor signal after cleaning or replacement See: Brakes and Traction Control/Antilock Brakes / Traction

Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Test Mode Procedure (to 12/2010).

NG -- CLEAN OR REPLACE SPEED SENSOR

OK -- CLEAN OR REPLACE SPEED SENSOR ROTOR

Vehicle Stability Control System (from 12/2010)

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM:

C0200/31,C0205/32,C1235/35,C1236/36,C1271/71,C1272/72,C1275/75,C1276/76: Right Front Wheel Speed Sensor Signal Malfunction

C1276/76 - Abnormal Change in Output Signal of Front Speed Sensor LH (Test Mode DTC)

DESCRIPTION

The speed sensor detects wheel speed and transmits the appropriate signals to the skid control ECU. These signals are used for control of the ABS

system. Each of the front and rear rotors has 48 serrations.

When the rotors rotate, the magnetic field generated by the permanent magnet in the speed sensor induces AC voltage. Since the frequency of this

AC voltage changes in direct proportion to the speed of the rotor, the frequency is used by the skid control ECU to detect the speed of each wheel.

DTCs C1271/71, C1272/72, C1275/75 and C1276/76 are output only in the Test Mode.

HINT

DTC No.C0200/31 and C1235/35 are for the front speed sensor RH.

DTC No.C0205/32 and C1236/36 are for the front speed sensor LH.