Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 94

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 94

HINT

After the inspection is completed, clear the DTCs.

PROCEDURE

1. REPLACE RADIO RECEIVER ASSEMBLY

(a) Replace the radio receiver assembly See: Accessories and Optional Equipment/Radio, Stereo, and Compact

Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (to 12/2010).

NEXT -- END

Audio and Visual System (from 12/2010)

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-21,01-22,01-2E: ROM Error

01-2E - EEPROM Error

DESCRIPTION

INSPECTION PROCEDURE

HINT

After the inspection is completed, clear the DTCs.

PROCEDURE

1. REPLACE RADIO RECEIVER ASSEMBLY

(a) Replace the radio receiver assembly See: Accessories and Optional Equipment/Radio, Stereo, and Compact

Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (from 12/2010).

NEXT -- END

Open in ABS Solenoid Relay Circuit - Vehicle Stability Control System (to 12/2010)

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C0278/11,C0279/12: Open in ABS Solenoid Relay Circuit

C0279/12 - Short to B+ in ABS Solenoid Relay Circuit

DESCRIPTION

The ABS solenoid relay supplies power to the ABS solenoid and TRAC solenoid.

The solenoid relay is turned on 1.5 seconds after the ignition switch is turned on (IG), and is turned off if an open or short in the solenoid is detected

by self diagnosis performed when the vehicle starts running.

The ABS solenoid relay is housed in the skid control ECU in the ABS & TRACTION actuator assembly.

HINT

If a speed signal of 4 mph (6 km/h) or more is input to the skid control ECU, with the ignition switch on (IG) and the stop light

switch off, the ECU performs self diagnosis of the motor and solenoid circuits.