Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 871

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 871

(e) Turn the Techstream on.

(f) Check the values by referring to the table below. Enter the following menus: Chassis / Tire Pressure Monitor / Data List.

Tire Pressure Monitor:

HINT

*1: Displayed only when the ID No. is not registered.

(g) Check the ID No. on the identified transmitter by removing it from the tire and wheel.

OK:

The registered transmitter ID codes are displayed on the Techstream display.

NG -- PERFORM REGISTRATION (TRANSMITTER ID)

OK -- REPLACE TIRE PRESSURE WARNING ECU See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring

System/Tire Pressure Module/Service and Repair/Removal (to 12/2010)

2. PERFORM REGISTRATION (TRANSMITTER ID)

(a) Register the transmitter IDs for all the wheels See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring

System/Testing and Inspection/Programming and Relearning/Registration (to 12/2010).

NEXT -- Continue to next step.

3. READ VALUE USING TECHSTREAM (TIRE INFLATION PRESSURE)

(a) Set the air pressure of all the wheels to the specified value See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring

System/Service Precautions/Precaution (to 12/2010).

(b) Make sure that the ignition switch is off.

(c) Connect the Techstream to the DLC3.

(d) Turn the ignition switch on (IG).

(e) Turn the Techstream on.

(f) Check the values by referring to the table below. Enter the following menus: Chassis / Tire Pressure Monitor / Data List.

Tire Pressure Monitor: