Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 988

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 988

INSPECTION PROCEDURE

NOTICE:

When replacing the ABS & TRACTION actuator assembly, perform zero point calibration See: Brakes and Traction

Control/Antilock Brakes / Traction Control Systems/Acceleration/Deceleration Sensor/Testing and Inspection/Calibration (from

12/2010).

HINT

Start the inspection from step 1 when using the Techstream and start from step 3 when not using the Techstream.

PROCEDURE

1. CHECK HARNESS AND CONNECTOR (MOMENTARY INTERRUPTION)

(a) Using the Techstream, check for any momentary interruption in the wire harness and connector corresponding to a DTC See: Brakes

and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Component Tests and General

Diagnostics/Check For Intermittent Problems.

ABS/VSC/TRAC

OK:

There are no momentary interruptions.

HINT

Perform the above inspection before removing the sensor and connector.

NG -- CHECK AND REPAIR HARNESS AND CONNECTOR (SPEED SENSOR CIRCUIT)

OK -- Continue to next step.