Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 905

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 905

(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:

LH

RH

NOTICE:

Check the speed sensor signal after replacement See: Brakes and Traction Control/Antilock Brakes / Traction Control

Systems/Testing and Inspection/Scan Tool Testing and Procedures/Test Mode Procedure (to 12/2010).

NG -- REPLACE REAR SPEED SENSOR

OK -- Continue to next step.

8. CHECK HARNESS AND CONNECTOR (REAR SPEED SENSOR TO SKID CONTROL ECU)

(a) SKID CONTROL ECU TO SKID CONTROL SENSOR WIRE

(1) Disconnect the skid control ECU connector and the rear speed sensor connector.

(2) Disconnect the skid control sensor wire.

(3) Measure the resistance according to the value(s) in the table below.