Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 858

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 858

HINT

*1: It may take about 2 or 3 minutes until the values are displayed. If the values are not displayed after a few minutes, perform

troubleshooting according to the inspection procedure for DTCs C2121/21 to C2125/25 See: C Code Charts/C2121/Tire Pressure

Monitoring (to 12/2010).

(g) Rapidly reduce the tire pressure for each wheel at least 40 kPa (0.4 kg/cm2, 5.8 psi) within 30 seconds.

(h) Check the Data List.

(i) When the "ID Tire Inflation Pressure" data (ID1 to ID5) has changed, repeat this procedure to identify the tire pressure warning valve

and transmitter that corresponds to the DTC.

(j) When all of the "ID Tire Inflation Pressure" data (ID1 to ID5) have changed, identify the malfunctioning tire pressure warning valve

and transmitter based on the ID numbers and output DTC.

Result:

NOTICE:

* It takes about 2 or 3 minutes to display the updated data.

* If "ID Tire Inflation Pressure" data has not changed, reset the tire pressure to the appropriate specified value and rotate the

tire 90 to 270 degrees. Then forcibly transmit the transmitter ID and recheck it.

* Record the transmitter ID and position that is normal condition.

NEXT -- Continue to next step.

3. REPLACE TIRE PRESSURE WARNING VALVE AND TRANSMITTER

(a) Replace the identified tire pressure warning valve and transmitter with a new one See: Instrument Panel, Gauges and Warning

Indicators/Tire Monitoring System/Tire Pressure Sensor/Service and Repair/Removal and Replacement/Removal.