Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 917
(b) Check for a short to B+ in the circuit.
(1) Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.
(2) Turn the ignition switch on (IG).
(3) Measure the voltage according to the value(s) in the table below.
Standard voltage:
(c) Check for an open in the circuit.
(1) Turn the ignition switch off.
(2) Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
(3) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(d) Check for a short to ground in the circuit.
(1) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(e) Check for a short in the circuit.
(1) Release the activation prevention mechanism built into connector "B" See: Restraints and Safety Systems/Air Bag
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System (to 12/2010).
(2) Measure the resistance according to the value(s) in the table below.
No comments:
Post a Comment