Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 978

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 978

WIRING DIAGRAM

INSPECTION PROCEDURE

NOTICE:

* When replacing the tire pressure warning ECU, read the transmitter IDs stored in the old ECU using the Techstream and

write them down before removal.

* It is necessary to perform the initialization See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring

System/Testing and Inspection/Programming and Relearning/Initialization (from 12/2010) after the registration See:

Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Testing and Inspection/Programming and

Relearning/Registration (from 12/2010) of the transmitter IDs into the tire pressure warning ECU if the ECU and/or one of

the valve and transmitters have been replaced.

PROCEDURE

1. CHECK FREQUENCY RECEIVING CONDITION

(a) Check that the vehicle is not located in an area described below:

(1) Facilities or devices that use similar radio frequencies are located in the vicinity of the vehicle.

HINT

If the vehicle is located in an area described above, the tire pressure warning light may come on only in a particular area.

(2) Devices using similar radio frequencies are used in the vehicle.