Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 80

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 80

HINT

* *1: Even if no fault is present, this DTC may be stored depending on the battery condition or engine start voltage.

* *2: If the power connector is disconnected after the engine starts, this DTC is stored after 180 seconds.

* *3: If the device is reported as not existing during verification, check the power source circuit and AVC-LAN circuit for the

device.

NOTICE:

* Before starting troubleshooting, be sure to clear the DTCs stored due to the reasons described in the HINT above. Then, check

for DTCs and troubleshoot according to the output DTCs.

* The radio receiver assembly is the master unit.

* Be sure to clear and recheck for DTCs after the inspection is completed to confirm that no DTCs are output.

INSPECTION PROCEDURE

NOTICE:

Be sure to read Description before performing the following procedure.

PROCEDURE

1. CHECK "RADIO RECEIVER COMMUNICATION ERROR" IN PROBLEM SYMPTOMS TABLE

HINT

Refer to Radio Receiver Communication Error See: Accessories and Optional Equipment/Radio, Stereo, and Compact

Disc/Testing and Inspection/Component Tests and General Diagnostics/Radio Receiver Communication Error (from 12/2010).

NEXT -- END

DTC 01-E0

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-E0,01-E3,01-E4: Registration Complete Indication Error

01-E4 - Multiple Frame Incomplete

DESCRIPTION

HINT

Even if no fault is present, these DTCs may be stored depending on the battery condition or engine start voltage.

INSPECTION PROCEDURE

HINT

After the inspection is completed, clear the DTCs. These DTCs do not indicate a malfunction.

Audio and Visual System (to 12/2010)

AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-DD,01-E1: Master Reset

01-E1 - Voice Processing Device ON Error