Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 997
OK:
There is no clearance between the sensor and rear axle carrier.
NOTICE:
Check the speed sensor signal after replacement See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Scan Tool Testing and Procedures/Test Mode Procedure (to 12/2010).
NG -- INSTALL REAR SPEED SENSOR CORRECTLY OR REPLACE REAR SPEED SENSOR
OK -- Continue to next step.
7. INSPECT REAR SPEED SENSOR
(a) Disconnect the rear speed sensor connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
LH
RH
NOTICE:
Check the speed sensor signal after replacement See: Brakes and Traction Control/Antilock Brakes / Traction Control
Systems/Testing and Inspection/Scan Tool Testing and Procedures/Test Mode Procedure (to 12/2010).
NG -- REPLACE REAR SPEED SENSOR
OK -- Continue to next step.
8. CHECK HARNESS AND CONNECTOR (REAR SPEED SENSOR TO SKID CONTROL ECU)
(a) SKID CONTROL ECU TO SKID CONTROL SENSOR WIRE
TOYOTA DIAGNOSIS AND REPAIR, MAINTENANCE, PARTS AND LABOR, SHOP OPERATIONS, TECHNICIAN'S REFERENCE, DIAGNOSTIC TROUBLE CODES(dtc), RELAYS AND MODULES, SENSORS AND SWITCHES,ENGINE, COOLING AND EXHAUST, POWERTRAIN MANAGEMENT, TRANSMISSION AND DRIVETRAIN, BRAKES AND TRACTION CONTROL, STARTING AND CHARGING, POWER AND GROUND DISTRIBUTION, STEERING AND SUSPENSION, HEATING AND AIR CONDITIONING, RESTRAINTS AND SAFETY SYSTEMS, ACCESSORIES AND OPTIONAL EQUIPMENT, BODY AND FRAME,CRUSIS CONTROL.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment