Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 834

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 834

HINT

*1: It may take about 2 or 3 minutes until the values are displayed. If the values are not displayed after a few minutes, perform

troubleshooting according to the inspection procedure for DTCs C2121/21 to C2125/25 See: C Code Charts/C2121/Tire Pressure

Monitoring (from 12/2010).

Result:

B -- REPLACE TIRE PRESSURE WARNING ECU See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring

System/Tire Pressure Module/Service and Repair/Removal (from 12/2010)

A -- END

Steering Angle Sensor Initialization Incomplete (to 12/2010)

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C1439/66,C1445/66: Steering Angle Sensor Initialization Incomplete

C1445/66 - Vehicle Driven with Steering Angle Sensor not Initialized

DESCRIPTION

The skid control ECU acquires the steering angle sensor zero point every time the ignition switch is turned to the ON position and the vehicle is

driven at 35 km/h (22 mph) or more for approximately 5 seconds. The ECU also stores previous zero point.

DTCs C1439/66 and C1445/66 will be cleared when the ignition switch is turned off.