Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 82
for 9 Speakers
Text in Illustration
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (to 12/2010)
OK -- Continue to next step.
3. IDENTIFY COMPONENT WHICH HAS STORED THIS CODE
(a) Enter diagnostic mode.
(b) Press preset switch "2" to change the mode to "Detailed Information Mode".
(c) Identify the component which has stored this code.
Showing posts with label NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio. Show all posts
Showing posts with label NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio. Show all posts
Tuesday, December 15, 2020
Sunday, December 13, 2020
Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 780
Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 780
OK:
The disc can be played correctly.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (from 12/2010)
OK -- END
Audio and Visual System (to 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 62-7D-62-7F,63-7D-63-7F: Disc cannot be Played
63-7F - Copyright Protection Error
DESCRIPTION
INSPECTION PROCEDURE
HINT
After the inspection is completed, clear the DTCs.
PROCEDURE
1. CHANGE DISC
(a) Insert a disc with a playable file and check if the disc can be played correctly.
OK:
The disc can be played correctly.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (to 12/2010)
OK -- END
Audio and Visual System (from 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 62-7D-62-7F,63-7D-63-7F: Disc cannot be Played
63-7F - Copyright Protection Error
OK:
The disc can be played correctly.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (from 12/2010)
OK -- END
Audio and Visual System (to 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 62-7D-62-7F,63-7D-63-7F: Disc cannot be Played
63-7F - Copyright Protection Error
DESCRIPTION
INSPECTION PROCEDURE
HINT
After the inspection is completed, clear the DTCs.
PROCEDURE
1. CHANGE DISC
(a) Insert a disc with a playable file and check if the disc can be played correctly.
OK:
The disc can be played correctly.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (to 12/2010)
OK -- END
Audio and Visual System (from 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 62-7D-62-7F,63-7D-63-7F: Disc cannot be Played
63-7F - Copyright Protection Error
Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 77
Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 77
OK:
No DTCs are output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (from 12/2010)
OK -- END
Audio and Visual System (from 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-D5,01-D8,01-D9,01-DA,01-DB,01-DE: Absence of Registration Unit
01-DE - Slave Reset
DESCRIPTION
HINT
* *1: Even if no fault is present, this DTC may be stored depending on the battery condition or engine start voltage.
* *2: If the power connector is disconnected after the engine starts, this DTC is stored after 180 seconds.
* *3: If the device is reported as not existing during verification, check the power source circuit and AVC-LAN circuit for the
device.
NOTICE:
* Before starting troubleshooting, be sure to clear the DTCs stored due to the reasons described in the HINT above. Then, check
for DTCs and troubleshoot according to the output DTCs.
* The radio receiver assembly is the master unit.
* Be sure to clear and recheck for DTCs after the inspection is completed to confirm that no DTCs are output.
INSPECTION PROCEDURE
NOTICE:
Be sure to read Description before performing the following procedure.
PROCEDURE
1. CHECK "RADIO RECEIVER COMMUNICATION ERROR" IN PROBLEM SYMPTOMS TABLE
HINT
Refer to Radio Receiver Communication Error See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Testing and Inspection/Component Tests and General Diagnostics/Radio Receiver Communication Error (from 12/2010).
NEXT -- END
Audio and Visual System (to 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-D5,01-D8,01-D9,01-DA,01-DB,01-DE: Absence of Registration Unit
OK:
No DTCs are output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (from 12/2010)
OK -- END
Audio and Visual System (from 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-D5,01-D8,01-D9,01-DA,01-DB,01-DE: Absence of Registration Unit
01-DE - Slave Reset
DESCRIPTION
HINT
* *1: Even if no fault is present, this DTC may be stored depending on the battery condition or engine start voltage.
* *2: If the power connector is disconnected after the engine starts, this DTC is stored after 180 seconds.
* *3: If the device is reported as not existing during verification, check the power source circuit and AVC-LAN circuit for the
device.
NOTICE:
* Before starting troubleshooting, be sure to clear the DTCs stored due to the reasons described in the HINT above. Then, check
for DTCs and troubleshoot according to the output DTCs.
* The radio receiver assembly is the master unit.
* Be sure to clear and recheck for DTCs after the inspection is completed to confirm that no DTCs are output.
INSPECTION PROCEDURE
NOTICE:
Be sure to read Description before performing the following procedure.
PROCEDURE
1. CHECK "RADIO RECEIVER COMMUNICATION ERROR" IN PROBLEM SYMPTOMS TABLE
HINT
Refer to Radio Receiver Communication Error See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Testing and Inspection/Component Tests and General Diagnostics/Radio Receiver Communication Error (from 12/2010).
NEXT -- END
Audio and Visual System (to 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-D5,01-D8,01-D9,01-DA,01-DB,01-DE: Absence of Registration Unit
Friday, December 11, 2020
Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 73
Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 73
OK:
No DTCs are output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (to 12/2010)
OK -- END
No Master (DSP AMP) (from 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-D6,01-D7: No Master
01-D7 - Connection Check Error
DESCRIPTION
HINT
* *1: Even if no fault is present, this DTC may be stored depending on the battery condition or engine start voltage.
* *2: When 210 seconds have elapsed after disconnecting the power supply connector of the master component with the ignition
switch to ON or ACC, this DTC is stored.
NOTICE:
* Before starting troubleshooting, be sure to clear the DTCs stored due to the reasons described in the HINT above. Then, check
for DTCs and troubleshoot according to the output DTCs.
* The radio receiver assembly is the master unit.
* Be sure to clear and recheck for DTCs after the inspection is completed to confirm that no DTCs are output.
INSPECTION PROCEDURE
NOTICE:
Be sure to read Description before performing the following procedure.
PROCEDURE
1. CHECK RADIO RECEIVER ASSEMBLY POWER SOURCE CIRCUIT
HINT
Refer to Radio Receiver Power Source Circuit See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Testing and Inspection/Component Tests and General Diagnostics/Radio Receiver Power Source Circuit (from 12/2010).
If the power source circuit is operating normally, proceed to the next step.
NEXT -- Continue to next step.
2. IDENTIFY COMPONENT WHICH HAS STORED THIS CODE
(a) Enter diagnostic mode.
OK:
No DTCs are output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (to 12/2010)
OK -- END
No Master (DSP AMP) (from 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-D6,01-D7: No Master
01-D7 - Connection Check Error
DESCRIPTION
HINT
* *1: Even if no fault is present, this DTC may be stored depending on the battery condition or engine start voltage.
* *2: When 210 seconds have elapsed after disconnecting the power supply connector of the master component with the ignition
switch to ON or ACC, this DTC is stored.
NOTICE:
* Before starting troubleshooting, be sure to clear the DTCs stored due to the reasons described in the HINT above. Then, check
for DTCs and troubleshoot according to the output DTCs.
* The radio receiver assembly is the master unit.
* Be sure to clear and recheck for DTCs after the inspection is completed to confirm that no DTCs are output.
INSPECTION PROCEDURE
NOTICE:
Be sure to read Description before performing the following procedure.
PROCEDURE
1. CHECK RADIO RECEIVER ASSEMBLY POWER SOURCE CIRCUIT
HINT
Refer to Radio Receiver Power Source Circuit See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Testing and Inspection/Component Tests and General Diagnostics/Radio Receiver Power Source Circuit (from 12/2010).
If the power source circuit is operating normally, proceed to the next step.
NEXT -- Continue to next step.
2. IDENTIFY COMPONENT WHICH HAS STORED THIS CODE
(a) Enter diagnostic mode.
Wednesday, December 9, 2020
Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 69
Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 69
OK:
No DTCs are output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (from 12/2010)
OK -- END
No Master (DSP AMP) (to 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-D6,01-D7: No Master
01-D7 - Connection Check Error
DESCRIPTION
HINT
* *1: Even if no fault is present, this DTC may be stored depending on the battery condition or engine start voltage.
* *2: When 210 seconds have elapsed after disconnecting the power supply connector of the master component with the ignition
switch to ON or ACC, this DTC is stored.
NOTICE:
* Before starting troubleshooting, be sure to clear the DTCs stored due to the reasons described in the HINT above. Then, check
for DTCs and troubleshoot according to the output DTCs.
* The radio receiver assembly is the master unit.
* Be sure to clear and recheck for DTCs after the inspection is completed to confirm that no DTCs are output.
INSPECTION PROCEDURE
NOTICE:
Be sure to read Description before performing the following procedure.
PROCEDURE
1. CHECK RADIO RECEIVER ASSEMBLY POWER SOURCE CIRCUIT
HINT
Refer to Radio Receiver Power Source Circuit See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Testing and Inspection/Component Tests and General Diagnostics/Radio Receiver Power Source Circuit (to 12/2010).
If the power source circuit is operating normally, proceed to the next step.
NEXT -- Continue to next step.
2. IDENTIFY COMPONENT WHICH HAS STORED THIS CODE
(a) Enter diagnostic mode.
OK:
No DTCs are output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (from 12/2010)
OK -- END
No Master (DSP AMP) (to 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-D6,01-D7: No Master
01-D7 - Connection Check Error
DESCRIPTION
HINT
* *1: Even if no fault is present, this DTC may be stored depending on the battery condition or engine start voltage.
* *2: When 210 seconds have elapsed after disconnecting the power supply connector of the master component with the ignition
switch to ON or ACC, this DTC is stored.
NOTICE:
* Before starting troubleshooting, be sure to clear the DTCs stored due to the reasons described in the HINT above. Then, check
for DTCs and troubleshoot according to the output DTCs.
* The radio receiver assembly is the master unit.
* Be sure to clear and recheck for DTCs after the inspection is completed to confirm that no DTCs are output.
INSPECTION PROCEDURE
NOTICE:
Be sure to read Description before performing the following procedure.
PROCEDURE
1. CHECK RADIO RECEIVER ASSEMBLY POWER SOURCE CIRCUIT
HINT
Refer to Radio Receiver Power Source Circuit See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Testing and Inspection/Component Tests and General Diagnostics/Radio Receiver Power Source Circuit (to 12/2010).
If the power source circuit is operating normally, proceed to the next step.
NEXT -- Continue to next step.
2. IDENTIFY COMPONENT WHICH HAS STORED THIS CODE
(a) Enter diagnostic mode.
Thursday, November 26, 2020
Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 40
Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 40
OK:
No DTCs are output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (to 12/2010)
OK -- END
Audio and Visual System (from 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: C0-40,C0-41: Antenna not Connected
C0-41 - Antenna Shorted
DESCRIPTION
INSPECTION PROCEDURE
HINT
After the inspection is completed, clear the DTCs.
PROCEDURE
1. CHECK CONNECTOR CONNECTION CONDITION
(a) Check that the satellite radio antenna cord is securely connected to the radio receiver assembly connector.
OK:
The cord is securely connected.
NG -- RECONNECT CONNECTOR CORRECTLY
OK -- Continue to next step.
2. REPLACE SATELLITE RADIO ANTENNA ASSEMBLY
(a) Replace the satellite radio antenna assembly See: Accessories and Optional Equipment/Antenna/Antenna, Radio/Service and
Repair/Removal and Replacement/Removal (from 12/2010).
(b) Clear the DTCs See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/DTC Check / Clear (from 12/2010).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (from 12/2010)
OK -- END
Audio and Visual System (to 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-D5,01-D8,01-D9,01-DA,01-DB,01-DE: Absence of Registration Unit
OK:
No DTCs are output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (to 12/2010)
OK -- END
Audio and Visual System (from 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: C0-40,C0-41: Antenna not Connected
C0-41 - Antenna Shorted
DESCRIPTION
INSPECTION PROCEDURE
HINT
After the inspection is completed, clear the DTCs.
PROCEDURE
1. CHECK CONNECTOR CONNECTION CONDITION
(a) Check that the satellite radio antenna cord is securely connected to the radio receiver assembly connector.
OK:
The cord is securely connected.
NG -- RECONNECT CONNECTOR CORRECTLY
OK -- Continue to next step.
2. REPLACE SATELLITE RADIO ANTENNA ASSEMBLY
(a) Replace the satellite radio antenna assembly See: Accessories and Optional Equipment/Antenna/Antenna, Radio/Service and
Repair/Removal and Replacement/Removal (from 12/2010).
(b) Clear the DTCs See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Testing and Inspection/Reading and
Clearing Diagnostic Trouble Codes/DTC Check / Clear (from 12/2010).
(c) Recheck for DTCs and check if the same DTC is output again.
OK:
No DTCs are output.
NG -- REPLACE RADIO RECEIVER ASSEMBLY See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Service and Repair/Radio Receiver/Removal (from 12/2010)
OK -- END
Audio and Visual System (to 12/2010)
AUDIO / VISUAL: AUDIO AND VISUAL SYSTEM: 01-D5,01-D8,01-D9,01-DA,01-DB,01-DE: Absence of Registration Unit
Subscribe to:
Posts (Atom)