INSPECTION PROCEDURE
PROCEDURE
1. PERFORM FORCED TRANSMISSION OF TRANSMITTER ID OF ALL WHEELS
(a) Set the tire pressure to the specified value See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring System/Service
Precautions.
(b) Turn the ignition switch off.
(c) Connect the Techstream to the DLC3.
(d) Turn the ignition switch to ON.
(e) Turn the Techstream on.
(f) Enter the following menus: Chassis / Tire Pressure Monitor / Data List.
(g) Check the values by referring to the table below.
No comments:
Post a Comment