Toyota Avalon V6-3.5L (2GR-FE) P Code Page 2101
HINT
* *1: Neutral
* *2: If the shift solenoid SLT is stuck on, the line pressure will be low. Therefore, the amount of torque that can be transmitted
by each gear is lower than the normal limit. When the engine power exceeds this lowered limit, the engine speed will increase
freely.
* *3: When shift solenoid SLT is stuck OFF, gear shifting is normal.
E -- GO TO DTC CHART (RELATED SHIFT SOLENOID VALVE (SLT) PERFORMANCE DTC P2714) See: Diagnostic
Trouble Code Descriptions/Automatic Transaxle System - U660E/Diagnostic Trouble Code Chart (to 12/2010)
D -- GO TO DTC CHART (RELATED SHIFT SOLENOID VALVE (SL4) PERFORMANCE DTC P2808) See: Diagnostic
Trouble Code Descriptions/Automatic Transaxle System - U660E/Diagnostic Trouble Code Chart (to 12/2010)
B -- GO TO DTC CHART (RELATED SHIFT SOLENOID VALVE (SL2) PERFORMANCE DTC P0776) See: Diagnostic
Trouble Code Descriptions/Automatic Transaxle System - U660E/Diagnostic Trouble Code Chart (to 12/2010)
A -- GO TO DTC CHART (RELATED SHIFT SOLENOID VALVE (SL1) PERFORMANCE DTC P0746) See: Diagnostic
Trouble Code Descriptions/Automatic Transaxle System - U660E/Diagnostic Trouble Code Chart (to 12/2010)
C -- Continue to next step.
3. INSPECT SHIFT SOLENOID VALVE (SL3)
(a) Remove the shift solenoid valve SL3.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
(c) Connect a positive (+) lead through a 21 W bulb to terminal 2 and a negative (-) lead to terminal 1 of the solenoid valve connector,
then check the movement of the valve.
OK:
The solenoid makes an operating noise.
NG -- REPLACE SHIFT SOLENOID VALVE (SL3) See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Overhaul/Shift Solenoid Valve/Disassembly
OK -- Continue to next step.
4. INSPECT TRANSMISSION VALVE BODY ASSEMBLY
OK:
There are no foreign objects on each valve and they operate smoothly.
NG -- REPAIR OR REPLACE TRANSMISSION VALVE BODY ASSEMBLY See: Transmission and Drivetrain/Automatic
No comments:
Post a Comment