Toyota Avalon V6-3.5L (2GR-FE) P Code Page 2102
Transmission/Transaxle/Valve Body/Service and Repair/Removal (to 12/2010)
OK -- Continue to next step.
5. INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY
OK:
The torque converter clutch operates normally.
NG -- REPLACE TORQUE CONVERTER CLUTCH ASSEMBLY See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Transaxle Assembly/Removal (to 12/2010)
OK -- REPLACE AUTOMATIC TRANSAXLE ASSEMBLY See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Service and Repair/Removal and Replacement/Transaxle Assembly/Removal (to 12/2010)
U660E Automatic Transaxle (from 12/2010)
U660E AUTOMATIC TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: P0796: Pressure Control Solenoid "C" Performance (Shift
Solenoid Valve SL3)
P0796 - Pressure Control Solenoid "C" Performance (Shift Solenoid Valve SL3)
SYSTEM DESCRIPTION
The TCM uses the vehicle speed signal to determine the actual gear position (1st, 2nd, 3rd, 4th, 5th or 6th gear).
Then the TCM compares the actual gear with the shift schedule in the TCM memory to detect shift solenoid valves and valve body mechanical
problems.
MONITOR DESCRIPTION
The TCM commands gear shifts by turning the shift solenoid valves on or off. According to the input shaft revolution, intermediate (counter) shaft
revolution and output shaft revolution, the TCM detects the actual gear position (1st, 2nd, 3rd, 4th, 5th or 6th gear position). When the gear position
commanded by the TCM and the actual gear position are not the same, the TCM illuminates the MIL and stores the DTC.
MONITOR STRATEGY
TYPICAL ENABLING CONDITIONS
No comments:
Post a Comment