Toyota Avalon V6-3.5L (2GR-FE) P Code Page 2071

Toyota Avalon V6-3.5L (2GR-FE) P Code Page 2071

(b) Measure the resistance according to the value(s) in the table below.

Standard resistance:

(c) Connect a positive (+) lead through a 21 W bulb to terminal 2 and a negative (-) lead to terminal 1 of the solenoid valve connector,

then check the movement of the valve.

OK:

The solenoid makes an operating noise.

NG -- REPLACE SHIFT SOLENOID VALVE (SL2) See: Transmission and Drivetrain/Automatic

Transmission/Transaxle/Service and Repair/Overhaul/Shift Solenoid Valve/Disassembly

OK -- Continue to next step.

4. INSPECT TRANSMISSION VALVE BODY ASSEMBLY

OK:

There are no foreign objects on each valve and they operate smoothly.

NG -- REPAIR OR REPLACE TRANSMISSION VALVE BODY ASSEMBLY See: Transmission and Drivetrain/Automatic

Transmission/Transaxle/Valve Body/Service and Repair/Removal (to 12/2010)

OK -- Continue to next step.

5. INSPECT TORQUE CONVERTER CLUTCH ASSEMBLY

OK:

The torque converter clutch operates normally.

NG -- REPLACE TORQUE CONVERTER CLUTCH ASSEMBLY See: Transmission and Drivetrain/Automatic

Transmission/Transaxle/Service and Repair/Removal and Replacement/Transaxle Assembly/Removal (to 12/2010)

OK -- REPLACE AUTOMATIC TRANSAXLE ASSEMBLY See: Transmission and Drivetrain/Automatic

Transmission/Transaxle/Service and Repair/Removal and Replacement/Transaxle Assembly/Removal (to 12/2010)

U660E Automatic Transaxle (from 12/2010)

U660E AUTOMATIC TRANSAXLE: AUTOMATIC TRANSAXLE SYSTEM: P0776: Pressure Control Solenoid "B" Performance (Shift

Solenoid Valve SL2)

P0776 - Pressure Control Solenoid "B" Performance (Shift Solenoid Valve SL2)

SYSTEM DESCRIPTION

The TCM uses the vehicle speed signal to detect the actual gear position (1st, 2nd, 3rd, 4th, 5th or 6th gear).