Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 842

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 842

Tires are normal.

HINT

If a tire is damaged, the tire pressure warning valve and transmitter may also have been damaged at the same time.

NG -- REPLACE TIRE AND TIRE PRESSURE WARNING VALVE AND TRANSMITTER See: Instrument Panel, Gauges

and Warning Indicators/Tire Monitoring System/Tire Pressure Sensor/Service and Repair/Removal and Replacement/Removal

OK -- Continue to next step.

2. IDENTIFY TRANSMITTER CORRESPONDING TO DTC

(a) Set the are pressure of all the wheels to the specified value See: Instrument Panel, Gauges and Warning Indicators/Tire Monitoring

System/Service Precautions/Precaution (to 12/2010).

(b) Make sure that the ignition switch is off.

(c) Connect the Techstream to the DLC3.

(d) Turn the ignition switch on (IG).

(e) Turn the Techstream on.

(f) Check the values by referring to the table below. Enter the following menus: Chassis / Tire Pressure Monitor / Data List.

Tire Pressure Monitor:

HINT

*1: It may take about 2 or 3 minutes until the values are displayed. If the values are not displayed after a few minutes, perform

troubleshooting according to the inspection procedure for DTCs C2121/21 to C2125/25 See: C Code Charts/C2121/Tire Pressure

Monitoring (to 12/2010).

(g) Rapidly reduce the tire pressure for each wheel at least 40 kPa (0.4 kg/cm2, 5.8 psi) within 30 seconds.

(h) Check the Data List.