Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 963

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 963

OK:

There are no momentary interruptions.

HINT

Perform the above inspection before removing the sensor and connector.

NG -- CHECK AND REPAIR HARNESS AND CONNECTOR (SPEED SENSOR CIRCUIT)

OK -- Continue to next step.

2. READ VALUE USING TECHSTREAM (FRONT SPEED SENSOR)

(a) Connect the Techstream to the DLC3.

(b) Start the engine.

(c) Select the Data List mode on the Techstream.

ABS/VSC/TRAC

(d) Check that there is no difference between the speed value output from the speed sensor displayed on the Techstream and the speed

value displayed on the speedometer when driving the vehicle.

OK:

The speed value output from the speed sensor displayed on the Techstream is the same as the actual vehicle speed.

NG -- INSPECT FRONT SPEED SENSOR INSTALLATION

OK -- Continue to next step.

3. PERFORM TEST MODE (SIGNAL CHECK)

(a) Check if Test Mode DTCs are detected.

Result:

B -- INSPECT FRONT SPEED SENSOR INSTALLATION

A -- Continue to next step.

4. INSPECT SPEED SENSOR AND SENSOR ROTOR SERRATIONS

(a) INSPECTION USING OSCILLOSCOPE