Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 1014

Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 1014

(b) Check that the stop light observed on the Techstream changes when the brake pedal is depressed.

OK:

When the brake pedal is depressed, the Techstream displays "ON".

NG -- REPLACE ABS & TRACTION ACTUATOR ASSEMBLY

OK -- Continue to next step.

4. RECONFIRM DTC

(a) Turn the ignition switch off.

(b) Clear the DTC See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Reading and

Clearing Diagnostic Trouble Codes/DTC Check / Clear (to 12/2010).

(c) Start the engine.

(d) At a speed of 30 km/h (18 mph) or more, drive the vehicle and perform braking test (decelerate the vehicle by depressing the brake

pedal).

(e) Check that the same DTC is recorded See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems/Testing and

Inspection/Reading and Clearing Diagnostic Trouble Codes/DTC Check / Clear (to 12/2010).

Result:

HINT

These DTCs may be restored due to a malfunction in the connector terminal connection, etc.

B -- REPLACE ABS & TRACTION ACTUATOR ASSEMBLY

A -- END

Master Cylinder Pressure Sensor Malfunction - Vehicle Stability Control System (from 12/2010)

BRAKE CONTROL: VEHICLE STABILITY CONTROL SYSTEM: C1246/46,C1281/81: Master Cylinder Pressure Sensor Malfunction

C1281/81 - Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC)

DESCRIPTION

Master cylinder pressure sensor is connected to the skid control ECU in the ABS & TRACTION actuator assembly.

DTC C1281/81 is output only in the Test Mode.