Toyota Avalon V6-3.5L (2GR-FE) Manufacturer Code Page 1015
INSPECTION PROCEDURE
NOTICE:
When replacing the ABS & TRACTION actuator assembly, perform zero point calibration See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Acceleration/Deceleration Sensor/Testing and Inspection/Calibration (from
12/2010).
PROCEDURE
1. INSPECT STOP LIGHT OPERATION
(a) Check that the stop light comes on when the brake pedal is depressed and goes off when the brake pedal is released.
OK:
NG -- CHECK STOP LIGHT CIRCUIT
OK -- Continue to next step.
2. READ VALUE USING TECHSTREAM (MASTER CYLINDER PRESSURE SENSOR)
(a) Connect the Techstream to the DLC3.
(b) Start the engine.
(c) Select the Data List mode on the Techstream.
No comments:
Post a Comment